Bartec Pegasus 7100, Руководство пользователя, Страница: 31 / 68

PEGASUS 71xx series
Operation
Technical data subject to change without notice.
09-2011
23/47
Note
PEGASUS models without tracking/geofence and man-down function do not display this
function in the general settings!
The “tracking” and “geofence” functions are available only in the supported models.
Special tracking software and a licence agreement are needed!
If the “tracking” or “geofence” function is switched on, the device is connected to the
server through the GPRS/TCP as soon as the GSM bars are green.
Further settings are required for the network provider (see chapter 6.7)
5.1.9 Man-Down
"Man-down" ON or OFF.
"OK"
Confirm the setting.
"BACK"
Exit the sub-menu.
Note
The man-down function (motion detection) is available only in supported models.
The man-down function can be activated or deactivated only if the settings (e.g. man-
down number etc.) are made with the separate phonebook software.
The man-down alarm is deactivated if the PEGASUS is connected to the charging cable
or to the desktop charger. See chapter 6 for further important information on the man-
down function.
Man-down symbol
Green Man-down ON
Red
Man-down Error (no GSM signal or battery to
low) + interval beep tone and vibration.
Note
GPS signal is not monitored.
Man-down display message
After man-down is triggered the pre-alarm countdown
display appears. After countdown the call starts
automatically.
Note
The pre-alarm is canceled automatically when the PEGASUS moved again.