Bartec MC 75A6exHF-NI, Руководство пользователя

Страница: 47 / 72

Mobile Computer MC 75Ax ex -NI and MC 75A6 ex HF-NI
Type B7-A27.-…………
Operation
Subject to technical changes.
04/2015
41/58
6.4.2 Equipment of the laser devices
Devices from BARTEC/ZEBRA equipped with lasers comply with the Guidelines
21CFR1040.10 and 1040.11. (with the exception of the deviations set out in the Laser
Notice No. 50 dated 24 June 2007) and EN 60825-1:2007 and IEC 60825-1 (Ed. 2)
The classification of the laser device is stated on a plate attached to the device.
Laser devices of Class 2 work with a visible low volt light emitting diode. As for every
bright light source, for example the sun, you should not look directly into the light beam.
There is no information about the hazards of being briefly exposed to the laser light of a
laser scanner of Class 2.
The use of control elements, adjustments or the application of procedures which do not
comply with the instructions described here may lead to hazardous exposure to beams.
6.4.3 Restrictions to wireless devices
The use of wireless devices is possibly forbidden or restricted. This applies primarily on
board aircraft, in hospitals, in the vicinity of explosive substances or under other
hazardous conditions. If you are not sure which regulations apply to the use of the
device, ask permission before switching it on.
Country-specific roaming
This device has the International Roaming function (IEEE802.11d) which ensures that the
device is used on the channels prescribed for the respective country.
Ad-hoc operation
The ad-hoc operation is restricted to the channels 36–48 (5150–5250 MHz). The use of
this bandwidth is restricted to indoor areas; use outdoors is not permitted.