Bartec MC 75A6exHF-NI, Руководство пользователя

Страница: 36 / 72

Commissioning
Mobile Computer MC 75Ax ex -NI and MC 75A6 ex HF-NI
Type B7-A27.-…………
30/58
Subject to technical changes.
04/2015
5.4.6 Insert SIM card (MC 75A6 ex -NI only)
The use of SIM cards can result in additional costs, which must be borne by the
purchaser (customer) of the devices. The seller will not cover any additional costs
incurred when these devices are used. Nor will the seller pay any other costs incurred
when this device is used in one of the customer´s applications.
Work steps
The slot for the SIM card is located beneath the battery.
1. Only install or replace the SIM card outside the potentially explosive atmosphere.
2. Press the red “ON/OFF” button to switch off the Mobile Computer.
3. Remove the battery.
4. Slide the SIM card cover to the left to unlook.
5. Lift the SIM card cover using the stylus tip.
6. Insert the SIM card with the cut edge of the card facing out and the contacts facing
down.
7. Lower the SIM card cover and using the stylus tip, slide in place.
8. Insert the battery.
9. Close the battery cover.
After installing the MC 75Ax ex -NI for the first time or after replacing the SIM card:
1. ress the red “ON/OFF” button to switch off the Mobile Computer.
2. On the Today screen, tap the Antenna icon.
3. Select Wireless Manager in the dialog box and check that the phone function is
activated.
4. Press the red “ON/OFF” button on the MC 75Ax
ex
-NI to set the MC 75Ax
ex
-NI to
standby mode.
5. Perform a warm boot.
6. Make a call to verify cellular connection.
The ZEBRA User Manual on the Integration of the Mobile Computers of MC 75Ax
(MC75A User Guide) contains detailed information on WWAN activation and the
settings.