Operational Instruction (Translation) / EN
4
Installation Devices
PE Support
Earthing Plate
Operation
DANGER
Death or serious injury through improper use.
• The ComEx control and indicating device may be operated
only within the technical limits that apply to it (see page 1).
Transport, Storage
NOTICE
ComEx control station damage through incorrect transport
or incorrect storage.
• Transport and storage is permissible in original packaging
only.
Maintenance and Fault Clearance
WARNING
Risk of injury due to incorrect proceedings.
• Only authorized qualified personnel may do any of the work
relating to maintenance and fault clearance.
• IEC/EN 60079-17 must be observed. It is recommended to
formulate a maintenance plan according to this standard.
WARNING
Risk of injury because the sealing is no longer assured.
• The sealing must be replaced every time the enclosure is
opened.
Maintenance
The operator of the ComEx control and indicating device must
keep it in good condition, operate it properly, monitor it and clean
it regularly. The ComEx control and indicating device must be
checked regularly for cracks and/or damage.
The owner/managing operator must schedule maintenance
intervals which will suit the respective conditions of use.
Fault Clearance
The ComEx control and indicating device is defective if it is
damaged and/or cracked.
Defective ComEx control and indicating devices cannot be
repaired; they must be replaced considering this operational
instruction.
Replacing/Fitting Components
– Snap the devices (1) onto the rail of the enclosure (2) with the
latch positioned in the cut-out in the rail. Please see manuals
of Exchange modules.
– Insert the PE support (3) for the protective conductor
connection either at the top or the bottom of the enclosure.
– Push the earthing plate (4) for metal cable entries in between
the rib and the inside wall of the enclosure. The earthing plate
is secured in place when the cable entry is screwed in.
1
2
3
4
01-3511-7D0002-A-05/2020-ESS-409352
Содержание ComEx 07-351 Series
Страница 1: ...ComEx Control and Indicating Devices Typ 07 351...
Страница 7: ...Typ 07 351 7 Side view 81 3 2 8 0 31 01 3511 7D0002 A 05 2020 ESS 409352...
Страница 8: ......