19
©2017, Barry Cordage Ltd.
BARRY B-NET SYSTEM • INSTALLATION GUIDELINES rev. 5
Appendix
A. Inspection and maintenance log
Each net system is identified with a manufacturing year and lot number and a Do Not Use after Date.
The use, inspection and maintenance log should be kept by persons responsible for the inventory of the net
systems in accordance with this document. An example of an Inspection and Maintenance log is found in the
following pages. Completed copies of Inspection and Maintenance logs are required if further inspections
are to be performed by Barry.
Some problems which can be identified during the system inspection are:
Problem
Action to be taken
Broken, missing or damaged
connection loop
Identify location on the net using flagging tape, remove net
from service and contact Barry for instructions
Broken or damaged net border
or mesh (0 cm to 30 cm)
Identify location on the net using flagging tape, remove net
from service and contact Barry for instructions
Major tear of net border or
mesh (30 cm +)
Return complete net system to Barry for inspection, repair or
replacement
Broken or damaged pole or clip
or tie wrap
Replace with new Barry product per instructions found in
Barry Installation Guidelines
Missing tie-up strap
Use an adequate substitute strap.
Contact Barry for replacement strap
Missing label
Set net aside, attempt to identify, and make a temporary
label. Contact Barry for a replacement label
Date of manufacture is greater
than 5 years
No longer fit to remain in service unless as determined and
validated by Barry (per inspection and testing)
Other damages or concerns
Contact Barry at 1-800-305-2673
IMPORTANT
: a Barry B-Net System
is never as valuable as a human life. If for any reason you do not feel
comfortable using a system, retire it immediately from service.
