Barry-Wehmiller Accraply 204RH, Руководство по эксплуатации и обслуживанию

Страница: 9 / 97

1 SECTION 1: SYSTEM OPERATION
1.1 Safety Procedures
1.1.1 General Guidelines
• Read and understand your Operation and Service Manual. Understand how to operate the Labeler before using it.
• Keep a regular maintenance schedule. A well maintained machine operates more efficiently.
• Do not operate the Labeler unless all components have been properly installed.
• Do not operate the Labeler unless all components are working properly.
• Do not use the Labeler to label products other than those for which it was designed.
• Do not operate the Labeler at faster speeds than those for which it was designed.
• Refer to Section 4, Appendix for safety instructions for purchased components.
1.1.2 Cautions and Warnings
• Do not operate the Labeler unless it has been electrically grounded.
• Do not remove protective covers and/or guards.
• Use extreme care to keep hands away from all pinch points during machine operation, especially between the
knurled and pressure rollers on the Applicator Head.
• Do not remove the product from the conveyor while the conveyor is moving. Stop the conveyor first.
• Do not wear loose clothing, jewellery, or ties that can be pulled into the machine during operation or maintenance.
Tie back and secure long hair that may get caught in machine.
1.1.3 Maintenance Safety
• Do not work on the drive system without locking out the power.
• Do not place your hands near a potentially moving surface without locking out the power.
• Use extreme care to avoid contact with the power supply voltages when performing maintenance inside the
Applicator Head enclosure.
• Replace all protective covers and/or guards if they have been removed for maintenance or repair.
• Do not operate, troubleshoot, or maintain the equipment while under the influence of any type of drug or alcohol.
• Do not use flammable or toxic cleaning fluids such as gasoline, benzene or ether when cleaning or maintaining the
equipment.
• Do not use lubricants and spare parts not specified in this manual. Doing so will cause increased downtime, poor
equipment performance and reduce the long term operating life of the machine.
• Do not touch the print head (if applicable) without discharging your static potential by touching the metal enclosure.
The print head is an electronic module and is highly sensitive to static impacts, which will damage the unit.
SAFETY PROCEDURES