RDG603A20 - Issue 10
Page 21 of 100
Description
Procedure for Warning Light
1
Tachometer Gauge
-
2
Hour Meter
-
3
Water Temperature Warning Light
Reduce the engine revs and stop the engine
within one or two minutes. Check the coolant
level (refer to
8. Cooling System of SECTION 7
- SERVICE PROCEDURE)
. If the coolant level is
incorrect, fill it to the correct level (refer to
8.
Cooling System of SECTION 7 - SERVICE
PROCEDURE
)
and restart the engine. If the
coolant level is correct and the fault is still
present, or there is a coolant leak, please contact
your local dealer.
4
Oil Pressure Warning Light
Stop the engine immediately. Contact your local
dealer. Failure to stop the engine may result in
permanent engine damage.
5
50A Alternator Charge Warning
Light
This indicates that the alternator has stopped
charging. The engine can still be operated for a
short period of time. Contact your local dealer.
6
150/240A Alternator Charge
Warning Light*
This indicates that the alternator has stopped
charging. The engine can still be operated for a
short period of time. Contact your local dealer.
7
Glow Plug Light
This indicates that the cold start system is
operating. If the light fails to illuminate during the
starting procedure contact your local dealer.
8
Key Flap and Ignition Switch
-
9
50A Alternator Output Gauge
-
10
Oil Pressure Gauge
-
11
Water Temperature Gauge
-
*Only applicable if fitted to the engine
