Catch the Light Combo
Instruction Manual
16
For assistance call: 1+(716) 866-0054
Troubleshooting
Having trouble assembling your new table?
Call our experts in the Parts and Service Department (1+716-866-0054) or email
and
we will be happy to assist you!
Machine Won’t Turn On:
1.
Check if the power outlet is working correctly.
2.
Check if the power supply inside the machine is functioning (a green LED will be illuminated).
3.
Check if the power in connector is connected correctly to the main board.
No Sound:
1.
Check to make sure the volume setting is not set to 0.
2.
Check to see if the speakers are connected correctly to the main board and connectors are secured properly
to each speaker.
3.
Check if SD card is plugged in correctly.
4.
Check if files on the SD card are in the top directory and have corec names (game_sta.mp3, game1.mp3, -
game5.mp3, winner.mp3)
Need to Fix and Replace a Button:
For step-by-step video instructions visit:
https://youtu.be/Taq6kUH6g0M
.
1.
Unmount the switch with LED from the button from below.
2.
Unscrew the nut from the button. The nut may be glued to prevent self-unscrewing
3.
Push out the button from below.
4.
Check if the button cover is broken; if so, replace it.
5.
Squeeze two plastic elements to release inner element and push it out. Notice that the spring is most likely
to jump out. Try to grab it before completely removing the inner element.
6.
Push the spring and squeeze the white plastic elements to block it from popping out. Then place the inner
element in the new button cover.
7.
Put the soft washer on the button and install the button back in the glass.
8.
Screw the nut back in and tighten it.
9.
Install the switch with the LED back inside the button.
Need to Replace Switch and Switch Adapter:
For step-by-step video instructions visit:
https://youtu.be/J8ccAI7JeJY
.
1.
Turn the switch counter-clockwise to remove it from the button.
2.
The old button and the new button may have different switch adapters and different mounting systems.
3.
The old button has the lock and switch adapter with locking pins. The new button will have locking pins and
a switch adapter with a lock.
4.
When changing the switch adapter, start with removing the LED.
5.
Bend the adapter in order to remove the switch.
6.
Place the switch in the new adapter and bend it again to lock it in position.
7.
Plug in the LED and insert it back into the button chamber.
8.
The new adapter will only work with the new buttons. It will not fit the old buttons. Old adapters will only
work with old buttons and not fit the new buttons.
Need to Upgrade Button Backlight (make brighter):
For a step-by-step video instruction visit: https://youtu.be/FDosX-on5rA.
1.
Remove the switch and take the LED bulb out.
2.
Squeeze the two plastic parts together to remove the button. Don’t forget about the spring inside. Remove
the spring as well.
