7
10
11
12
a. Slide stair railing section with brackets back
in-between posts
b. Add #
10 x 1
1
⁄
4
"
mounting screws to brackets to secure
stair railing section to posts
Pre-drill each side of the top rail brackets using the screw
holes provided with a 5/32" drill bit. Use provided
#10 x 1"
screws to secure top rails to brackets.
Snap caps “half-moons” onto sides of stair railing brackets
to cover the exposed screws
Railing to Posts
Pre-Drilling
Finishing
Note: Select Stair Railing sections will rack to a maximum of 32 degrees. If your custom installation calls for a greater angle you will need to route the hole openings to a
longer length.