5
For Vinyl Stair Rail Installation:
Closely follow post installation instructions (or sleeve existing wood 4x4)
Temporarily secure a deck board (5/4") to your stair treads to determine the
spacing between the nose of the stairs and your bottom rail
a. Lock tabs on baluster/spindle must face outer edge of
routed holes in rails
b. Assemble your stair railing section by snapping balusters/
spindles in rails
1
2
3
Post Installation
Determine Spacing
Assemble your stair railing section
Temporary
deck board
Lock tabs
Outer edge holes
Place assembled stair railing section adjacent to mounted stair
posts, leaving equal distances from the ends of both balusters and
clamp your stair railing section to the posts
Align top and bottom angle brackets on mounted stair post adjacent
to stair railing section and mark the rail at the end of
each bracket
While holding angle brackets adjacent to stair railing sections check
for proper bracket angle and mark the hole on the inside of the angle
brackets
4
5
6
Stabilize Section
Marking Bracket Spacing
Marking Bracket Angle
Equal
Distances
