Barrett 4000 Series, Сетевое руководство

Страница: 32 / 65

32
ETHERNET SETUP SCENARIOS - SCENARIO 3
Setting up a Static IP Address on a 4050 Transceiver
The following steps show how to set up the control head with a static IP. A
default gateway and DNS information are not required and can be left to
0.0.0.0.
Ensure the USB-Ethernet adaptor is connected to an active LAN before beginning
this procedure.
1. From the 4050 HF SDR Trans-
ceiver’s Settings screen, tap
Network
to display the Network
screen.
2. Change the Operation Mode to
“Ethernet”
Configuration
Tap Configuration from the Net-
work screen to display the Network
Configuration screen.
A list of items that may be con-
figured displays. To reveal more
items, either swipe down on the
touch screen or press
.
A brief description of each of the
items which may be configured is
described beneath the items.
The current status of each of the
items is displayed on the right of
screen.
Each item on the list is described in
more detail below.
0.0.0.0