Barracuda Networks SSL VPN, Руководство администратора

Страница: 25 / 124

Getting Started 25
3.
Check to see if the current version is the same as the latest general release. If the rules are up-to-
date, proceed to the next section. If the rules are not up-to-date, continue to the next step.
4.
Click
Update
to download and install the latest available definitions onto the Barracuda SSL
VPN.
Route Incoming Connections to the Barracuda SSL VPN
To take advantage of the features of the Barracuda SSL VPN, you must route HTTPS incoming
connections on port 443 to the Barracuda. This is typically achieved by configuring your corporate
firewall to port forward SSL connections directly to the Barracuda SSL VPN:
Completing Configuration of the Barracuda SSL VPN
Once the Barracuda SSL VPN has been integrated into your corporate network, you will need to
complete two sets of configurations, each done by a different administration account from a different
Web interface. The minimum required Administrative configurations would have already been done
as a part of integrating the Barracuda SSL VPN into your network, but there are a few additional steps
that are highly recommended. The SSL VPN Management configurations, however, will need to be
done in order for any users to access your protected resources.
To complete the SSL VPN Management configurations:
1.
Log in as the ssladmin user to the SSL VPN Management interface (port 80, or as otherwise
specified in Step 4d of
Configure Administrative Settings
on page 22
)
.
2.
From the
ACCESS CONTROL > User Databases
page, configure one or more user databases
from which all user and group information will be retrieved.
3.
From the
ACCESS CONTROL > Policies
page, configure one or more Policies, to define which
users and groups are to have the same access privileges. You can also choose to use the
Everyone Policy, which automatically includes all users with authorized access to the Barracuda
SSL VPN.
4.
From the
ACCESS CONTROL > Resources
page, configure one or more network resources that
are to be made available to remote users.
Optional Administrative configurations:
1.
Log in as the admin user to the Administrative interface (port 8000, or as otherwise specified in
Step 4c of
Configure Administrative Settings
on page 22
)
.
2.
Install an SSL certificate.
Note
The Appliance Administrator Web interface ports on 8000/8443 will also need similar port forward
configurations if you intend to manage the appliance from outside the corporate network.