![Barracuda Networks SSL VPN Скачать руководство пользователя страница 20](http://html1.mh-extra.com/html/barracuda-networks/ssl-vpn/ssl-vpn_administrators-manual_3925558020.webp)
20 Barracuda SSL VPN Administrator’s Guide
Initial Setup
These are the general steps to installing and integrating the Barracuda SSL VPN into your network.
For more detailed instructions for each step, see the following reference pages.
Prepare for the Installation ............................................................... 20
Connect Barracuda SSL VPN to Network ......................................... 20
Configure IP Address and Network Settings ..................................... 21
Configure Your Corporate Firewall................................................... 21
Configure Administrative Settings ..................................................... 22
Activate Your Subscriptions ............................................................... 23
Connect Barracuda SSL VPN to Network ......................................... 20
Update Definitions............................................................................. 24
Route Incoming Connections to the Barracuda SSL VPN................. 25
Completing Configuration of the Barracuda SSL VPN ..................... 25
Prepare for the Installation
Before installing your Barracuda SSL VPN, complete the following tasks:
1.
Decide which type of deployment is most suitable to your network. For more information on the
deployment options, see
Barracuda SSL VPN Configurations
on page 15.
2.
Verify you have the necessary equipment:
• Barracuda SSL VPN (check that you have received the correct model)
• AC power cord
• Ethernet cables
• VGA monitor (recommended)
• PS2 keyboard (recommended)
Connect Barracuda SSL VPN to Network
1.
Fasten the Barracuda SSL VPN to a standard 19-inch rack or other stable location.
2.
Connect a CAT5 or a CAT6 Ethernet cable from your network switch to the ethernet port on the
back
of the Barracuda SSL VPN.
3.
Connect the following to your Barracuda SSL VPN:
• Power cord
• VGA monitor
• PS2 keyboard
After you connect the AC power cord, the Barracuda SSL VPN may power on for a few seconds
and then power off. This behavior is normal.
4.
Press the
Power
button located on the front of the unit.
Caution
Do not block the cooling vents located on the front and rear of the unit.
Содержание SSL VPN
