Baroness LS62, Руководство по эксплуатации для владельца

Страница: 24 / 37

1 Reel cover
2 Knob
3 Cover adjustment plate
A Fully open
B Fully closed
Adjustment of Reel Cover (Variable Easy
Latch Type)
Note:
Depending on the specifications, this function
may not be available.
The angle of the reel cover can be adjusted.
The opening angle of the reel cover can be set
to one of six positions in 12.5-degree
increments.
Pull the rod connecting the left and right
knobs securing the reel cover in order to
release the cover.
1
2
3
1qbdtn-006
Adjustment of Reel Cover (Variable Easy Latch Type)_001
1 Reel cover
2 Rod
3 Cover adjustment plate
Secure the reel cover to a different hole in
the cover adjustment plate.
Note:
If the fin is installed, the reel cover cannot be
fully closed.
3
2
1
4
A
B
1qbdtn-007
Adjustment of Reel Cover (Variable Easy Latch Type)_002
1.
2.
1 Reel cover
2 Rod
3 Cover adjustment plate
4 Fin
A Fully open
B Fully closed
Adjustment of CR Brush
Note:
Depending on the specifications, this function
may not be available.
Important
Do not place the brush in contact with the rear
roller too tightly.
It will cause belt slip and break.
Important
The rotating CR brush prevents grass
clippings, etc., from attaching to the rear roller.
Loosen the bolts A, bolts B and nuts used to
install the CR brush.
Adjust the CR brush so that there is a
clearance of 0 to 1.0 mm (0 to 0.039 in)
between it and the rear roller, and then firmly
tighten the loosened bolts and nuts.
1
5
4
3
2
zp6tso-003
Adjustment of CR Brush_001
1 Bolt A
2 Nut
3 Bolt B
4 Brush
5 Rear roller
1.
2.
LS62
・
LS66
Handling Instructions
Page 4-10
Adjustment before Work