12
Confirmation of the operation of clutch lever and brake lever
Check that the clutch and brake operate completely.
When adjustment is necessary, make adjustment according to "5-8. [Important]
Adjustment of engine clutch section."
Connection of engine switch cord
When assembling the handle, check the connection of the engine switch cord. There
are two connections - plug and crimp terminal.
1) The plug is connected to the plug that is connected to the engine.
2) The crimp terminal is secured to the engine crankcase with a hexagon bolt. When
the connection of the engine switch cord is incomplete, the engine will not stop even
if the engine switch is operated. Check that the cord is correctly connected.
Installing / removing basket
Before installing / removeing basket, keep machine stop.
When installing basket, hand the side latches (right & left) of basket on the roller
brackets. When removing basket, raise the basket up to disengage side latches (right &
left) from the roller brackets.
1-3
1-5
1-4
WARNING
Plug
Crimp terminal
2.Inspection before use
Greasing
The transmission and intermediate transmission gears are equipped
with needle bearings. Grease them every 10 hours. Shortage of
grease will cause damage to the needle bearings.
Inspection of engine oil
Replenish the engine with engine oil. (A correct level will be shown when the engine is
placed horizontally.) Change engine oil 8 hours after the initial operation, and every 50
hours from the second time onward. Oil : SAE30.
Inspection of wire
Check that the clutch wire and brake wire are normal.
Inspection of brake
Inspect whether the brake functions completely.
When need to adjust brake, according to "5-6 Brake lever" to adjust it.
2-1
2-2
2-3
2-4
10h
DANGER
CAUTION
Roller bracket
Latch
