11
Handling
1. Assembly and adjustment of main unit
Installing the handle
1) Put the handle pin on the left frame into the hole at the left-side lower edge of the
handle.
2) While pressing the right-side lower edge of the handle inward, put the handle pin of
the right frame into the hole.
3) Secure the lower edge (slotted section) of the right and left handles to the frame from
the back with the bolt, conical spring washer, and washer.
1-1
Left-side lower edge of handle
Conical spring washer
Washer
Bolt
Handle pin
(Left frame)
Handle pin (Right frame)
Right-side lower edge of handle
*
While pressing the
right-side lower edge
of the handle inward,
put the handle pin
Installing the stand
1) Temporarily secure the left side of the stand to the frame with the bolt, washer
(inside), and nut (outside).
2) Put the spring on the projection of the frame and the projection at the right edge of
the stand.
3) While pulling the right side of the stand backward, make alignment with the hole in
the frame, and secure the stand with the bolt, washer (inside), and nut (outside).
4) Tighten the bolt, washer, and nut at the left side of the stand that were temporarily
secured.
1-2
Put the spring on the projection.
Temporarily secure the
left side of the stand.
Tighten the
left side of
the stand.
While pulling the right side
of the stand backward,
make alignment with the
hole and secure the stand.
