Baroness LM283, Руководство по эксплуатации для владельца

Страница: 42 / 75

Procedure to Start / Stop Engine
Start / Stop of Engine
Procedure to Start Engine
Warning
Before starting the engine, make sure that
there are no other people or obstacles around
the machine.
Important
Starter operation must take 15 seconds or
less.
If the engine does not start, stop using the
battery for 30 to 60 seconds to avoid
exhausting the battery.
Open the fuel cock.
The fuel cock is located by the side of the
fuel tank.
2
3
4
1
5
OFF
ON
v2e27i-004
Procedure to Start Engine_001
1 Rubber catch, small
2 Hood COMP, right
3 Hood support rod
4 Fuel filter
5 Fuel cock
1.
Sit on the seat.
Make sure that you have depressed the
brake pedal and applied the parking brake.
Shift the reel rotation lever to the "Stop"
position.
Make sure that the traveling pedal is in the
neutral position.
Shift the throttle lever halfway from the
"Low" to the "High" position.
1
2
3
4
v2e27i-001
Procedure to Start Engine_002
1 Parking brake lever
2 Throttle lever
3 Reel rotation lever
4 Brake pedal
Important
The thermo-start lamp turns off at the
specified time. However, the lamp turning off
is not related to the glow plug generating heat.
If the ignition key is left in the "GLOW"
position after the lamp is turned off, the plug
will still generate heat. The thermo-start lamp
will stay illuminated for five seconds.
Switch the ignition key to the "GLOW"
position.
Make sure that the glow plug is generating
heat and the thermo-start lamp is turned on.
Caution
Quickly returning the ignition key from the
"START" position to the "ON" position may
result in damage to the machine.
After the thermo-start lamp turns off,
immediately set the ignition key to the
"START" position.
2.
3.
4.
5.
6.
7.
8.
9.
LM283
Handling Instructions
Page 4-20 Procedure to Start / Stop Engine