Baroness LM283, Руководство по эксплуатации для владельца

Страница: 41 / 75

Use the cutting height gauge to
determine the position, then tighten
cutting height adjustment nut B securely.
1
5
6
7
4
A
2
3
ut7d6z-002
Front Wheel Type_002
1 Reel cutter (cutting cylinder)
2 Front Wheel
3 Cutting height gauge
4 Bed knife (bottom blade)
5 Cutting height adjustment nut A
6 Cutting height adjustment nut B
7 Rear roller
A Cutting height
Adjustment of Cutter Adjustment Spring
If the diameter of the reel cutter (cutting
cylinder) becomes smaller, adjust the cutter
adjustment spring.
Adjust the blade engagement.
Loosen the pipe with cutter adjusting screw,
and then adjust the length of the spring coil
to approximately 40 mm (1.575 in).
1
A
tv9pml-001
Adjustment of Cutter Adjustment Spring_001
1 Pipe with cutter adjusting screw
A 40 mm (1.575 in)
[2]
1.
2.
Adjustment of Lift Arm Spring
Important
Adjust the spring if the front wheels slip on an
ascending slope.
Raise the mower units.
Loosen lock nut A, then tighten lock nut B to
adjust the spring.
Perform the same procedure for both left and
right.
Make an adjustment so that the lift arm
spring will be compressed evenly.
1
2
3
8euq9x-001
Adjustment of Lift Arm Spring_001
1 Lift arm spring
2 Lock nut A
3 Lock nut B
1.
2.
3.
Handling Instructions
LM283
Handling Instructions
Page 4-19 Adjustment Before Operating