Dry with compressed air.
1
2
3
1hecmb-004
Cleaning of Fuel Strainer_001
1
Filter
2
O ring
3
Strainer cup
Important
During installation, prevent contamination with
dirt or dust.
If the fuel is contaminated with dirt, dust, etc.,
the fuel flow will become insufficient.
Correctly install all parts in their original
positions.
Fill up the fuel tank with fuel, and then open
the fuel cock.
Make sure that there is no fuel leakage.
Liquid Leakage
Inspection of Liquid Leakage
Important
After approximately 50 hours of operation,
some tightened portions may be loosened and
liquid such as oil may leak.
Be sure to retighten the parts.
Important
If liquid leakage found, repair it before
operation.
Ignoring leakage will cause further trouble.
Check the bottom of the machine for
leakage of liquid such as oil, water, etc.
Locate the leakage and identify the type of
liquid.
4.
5.
6.
7.
1.
2.
Bolts and Nuts
Inspection of Bolts and Nuts
Important
The bolts and nuts may be loosened at the
earlier stage of the use.
Be sure to retighten or replace before
operating the machine whenever there is any
abnormality.
Check the bolts and nuts for looseness and
coming off.
Check the bolts and nuts for cracks and
damages.
Check the bolts and nuts for rust.
Check around the bolts and nuts for traces
of rust fluid.
Check for unequal bolt length.
Check the bolts and nuts for stripped
threads and abrasion.
Grass Catcher
Inspection of Grass Catcher
Make sure that there is no wear or
deterioration of the grass catcher.
Make sure that there is no damage to the
grass catcher.
Make sure that there is no interference to
moving parts due to deformation of the
grass catcher.
Adjustment before Work
Adjustment of Handle Position
The height of the handle can be adjusted
according to the operator's working position.
Move the handle adjusters supporting the
handle up or down and fix them with the bolts.
A
B
1
2
3
75uxaw-011
Adjustment of Handle Position_001
1.
2.
3.
4.
5.
6.
1.
2.
3.
LM18GC
・
LM56GC / LM66TC
Handling Instructions
Page 5-8
Adjustment before Work
