13
www.barosnt.com
System Operation:
1.
Ensure that all components are connected properly, and that the receiver output is
connected to your audio system’s mixer or amplifier.
2.
On the rear of the receiver, turn the Power switch to the ON position.
3.
Note the operating channel number appearing on the receiver and confirm it is correct.
4.
Turn on the microphone and ensure that the operating channel matches that of the
receiver.
5.
By turning ON/OFF the microphone’s power switch, you can confirm the operating
channel.
6.
After viewing the channel on the hand mic for 3 seconds the status window will
show “- -”.
7.
If there are any issues or abnormalities with the audio transmission, re-check the system
entirely.
8.
If purchased with the optional microphone charger, always return the hand microphone
to the charger after use. Be sure that both the microphone and receiver are powered off
before placing the microphone in the charger.
OPERATION
