11
www.barosnt.com
Setting the Volume:
1.
You can set the Volume using the Volume adjustment knob.
2.
The optimal setting is for the indicator to be set at the 12 o’clock position, half way
between the MIN and MAX settings.
3.
If not already matching, test the audio levels after setting the operation channels of the
microphones and receiver.
4.
Also remember to check the volume settings on the mixer or amplifier the receiver is
connected to.
Setting the Tone:
1.
You can set the Tone by using Tone adjustment knob.
2.
The optimal setting is for the indicator to be set at the 12 o’clock position, half way
between the LO and HI settings.
3.
If you need high treble, rotate the adjustment knob clockwise. If you want to reduce the
amount of treble, turn the adjustment knob counter-clockwise.
4.
You should use the Tone setting to make adjustments if howling occurs.
*** If setting the Tone to the highest setting, howling is likely to occur.
Setting the Squelch:
Squelch is a method of eliminating channel noise that may occur when a microphone is not in
use. Squelch suppresses the output until a stronger input signal (voice, etc.) is received.
1.
Using the RANGE/SQUELCH adjustment knobs on the back of the receiver, you may
adjust the settings for each channel individually.
2.
If you find that the receiver is picking up distortion or undesired noises, set the
adjustment knob to HI.
3.
In the case that interference occurs when you are trying to use a microphone, turn the
adjustment knob towards the LO setting.
SETTINGS
