Barnstead F46110CM, Руководство по эксплуатации

Страница: 10 / 48

10
Model# F46230CM, F46238 F46240CM F46248 F46240CM-75 F46248CM-75
F46230CM-33 F46240CM,-33 F46240CM-33-75
Dimensions Overall-in Width 34-1/8 34-1/8 34-1/8 34-1/8 34-1/8 34-1/8
(cm) (86.7) (86.7) (86.7) (86.7) (86.7) (86.7)
Height 22-1/2 22-1/2 22-1/2 22-1/2 22-1/2 22-1/2
(57.2) (57.2) (57.2) (57.2) (57.2) (57.2)
Depth 23 23 23 23 23 23
(58.4) (58.4) (58.4) (58.4) (58.4) (58.4)
Chamber- Width 10 10 10 10 10 10
in (cm) (25.4) (25.4) (25.4) (25.4) (25.4) (25.4)
Height 10-1/4 10-1/4 10-1/4 10-1/4 10-1/4 10-1/4
(26) (26) (26) (26) (26) (26)
Depth 9-3/4 9-3/4 9-3/4 9-3/4 9-3/4 9-3/4
(24.8) (24.8) (24.8) (24.8) (24.8) (24.8)
Weight LBS.(kg) 234 (106.3) 234 (106.3) 234 (106.3) 234 (106.3) 234 (106.3) 234 (106.3)
Electrical Volts 240 208 240 208 240 208
Rating Amps 40*/20.8# 40*/24# 40*/20.8# 40*/24# 40*/20.8# 40*/24#
Watts 9600* 8320* 9600* 8320* 9600* 8320*
5000# 5000# 5000# 5000# 5000# 5000#
Phase 1 1 1 1 1 1
Temp. Range Cont. 1700°C 1700°C 1700°C 1700°C 1700°C 1700°C
Controller Automatic Automatic 4-Program. 4-Program. Multi-Prog. Multi-Prog.
# Power and current required to maintain maximum temperature after stabilization.
The maximum current is determined by the limiting factor set by the current controller. In the event that 40 amperes is not available, the
current controller may be set to limit the current to some smaller value at the expense of a somewhat longer heat-up time.
The variation in current is a result of molybdenum disilicide heating elements
having a large decrease in resistance with increasing temperature.
NOTES: The maximum ramp rates for this furnace for heat-up are: 100°C per minute from 25°C-1000°C and
15°C per minute from 1000°C-1700°C.
Environmental Conditions
Operating:17°C-27°C; 20% to 80% relative humidity,
non-condensing. Installation Category II (over- voltage) in accordance with IEC 664.
Pollution Degree 2 in accordance with IEC 664. Altitude limit: 2,000
meters.
Storage: -25°C to 65°C; 20% to 80% relative humidity.
G
ENERAL
S
PECIFICATIONS