11
Installation
Site Selection:
Install furnace on a sturdy surface and allow adequate
space for ventilation.
The electrical specifications are located on the specifica-
tion plate on the back of the furnace. Consult Barnstead/
Thermolyne if your electrical service is different than
those listed on the specification plate. Prior to connecting
your Type F62700 furnace to your electrical supply, be
sure the front power switch is in the “OFF” position.
ObservŇThese Warnings Before Operating
Your Furnace:
Installation
CAUTION
Be sure ambient temperature does not exceed
104°F (40°C). Ambients above this level may re-
sult in damage to the controller.
Allow at least six inches of space between the fur-
nace and any combustible surface. This permits
the heat from the furnace case to escape so as not
to create a possible fire hazard.
WARNING
Do not use in the presence of flammable or com-
bustible chemicals. Fire or explosion may result;
this device contains components which may ignite
such materials.
WARNING
To avoid burns, this furnace must not be touched
on the exterior or interior furnace surfaces during
use or for a period of time after use.
