7
Declaration of Conformity
(for 230 volt, CE Models Only)
Barnstead International hereby declares under its sole responsibility that this product conforms with the technical
requirements of the following standards:
EMC:
EN61000-3-2
Limits for Harmonic current emissions
EN61000-3-3
Limits for voltage fluctuations and flicker
EN61326-1
Electrical equipment for measure, control, and laboratory use; Part I:
General Requirements
Safety:
EN61010-1
Safety requirements for electrical equipment for measurement, control,
laboratory use; Part I: General Requirements
EN61010-2-010
Part II: Particular requirements for laboratory equipment for the heating of
materials
per the provisions of the Electromagnetic Compatibility Directive 89/336/EEC, as amended by 92/31/EEC and
93/68/EEC, and per the provisions of the Low Voltage Directive 73/23/EEC, as amended by 93/68/EEC.
The authorized representative located within the European Community is:
Electrothermal Engineering Ltd.
419 Sutton Road
Southend On Sea
Essex SS2 5PH
United Kingdom
Copies of the Declaration of Conformity are available upon request.
