Barnett Engineering B1277, Руководство по установке и эксплуатации

Страница: 33 / 50

PROGRAMMING PAGE 29
Cellphone Programming
The B1277 contains a CDMA based module that is pre-configured at
the factory except for the assigned Mobile Number. This program
code will allow reading the Serial Number (ESN) from the device and
then writing the Mobile Identification Number (MIN) and Mobile
Directory Number (MDN) to it as assigned it by the carrier. When not
specified, the MIN and MDN are the same. The Phone Control is a
parameter predefined by the cellular service provider and is
automatically programmed into the module. Contact Barnett Technical
Support prior to changing this parameter.
Cv3: "Program Phone"
Cv3: "ESN is . . ."
+ 11 digit serial number
You: Exit to Main Menu
Next item.
Cv3: "Mobile Number is . . ."
+ 10 digit phone number
You: Enter a new 10 digit number
Exit to Main Menu.
Next setting.
Cv3: "Mobile Directory is . . ."
+ 10 digit phone number
You: Enter a new 10 digit number
Exit to Main Menu.
Next Setting.
Cv3: "Phone Control is . . ."
0-7; 3=Default, 5=Verizon
You: Enter a new value (0 to 7)
Exit to Main Menu.
Exit to Main Menu.