Barnett Engineering B1277, Руководство по установке и эксплуатации

Страница: 12 / 50

PAGE 8 PROGRAMMING
5. PROGRAMMING
Programming With A PC
In order to program your Cv3 using a PC, you will need to install the
appropriate programming software. A complimentary copy of our
Windows-based software was included in the purchase of the product.
Simply insert the disk into your CD/DVD ROM drive and follow the
InstallShield instructions. Be sure to keep the disk in the drive until
your initial programming is complete.
Once the installation of the programming software is complete, you
will need to connect your Cv3 to your PC. Two data connectors are
provided for programming and monitoring the Cv3: an RS232 port
using a DB9 male connector and a USB type B connector. Do not use
both at the same time.
If you are using the USB connection, you will need to install the
drivers found on the installation CD. The Found New Hardware
Wizard will ask you if you want Windows Update to search for
software; select “
No, not at this time ”. You will then be prompted for
an installation CD. This is the software that was provided to you and
should still be in your drive. Select
“Install the software
automatically” . Confirm the hardware selected is CP2101 USB
Composite Device. Select “ Next ”. Finally, Windows may ask for
authorization to continue without Logo testing. Select “ Continue
Anyway ”. You will need to go through this process twice to install the
drivers.
Now that your software and drivers are installed, you are ready to
program your unit.
Simply double click the BE shortcut on your desktop or follow your
start menu to All Programs and select Barnett Engineering. This will
open up a generic folder containing information for all of our products.
You will find the Cv3 Configuration Software in the B1277 Cv3
folder. Select this executable and it will open the programming
software. All information pertaining to the software can be found
within the Help files of the Cv3 Configuration Software.