Barnett Engineering B1277, Руководство по установке и эксплуатации

Страница: 25 / 50

PROGRAMMING PAGE 21
Menu items for 5 Volt, 30 Volt, and Current Analog Input Sensors are:
Cv3: "Input N Is . . ."
You:
Enter new value
0 = disabled
1 = enabled
1 to 6 = new group member
Exit to Main Menu
Next setting
Cv3: "Setpoint High is . . ."
You:
Enter new value
Enter the new setpoint as a 1 to 4 digit value, the
decimal point will automatically be placed
according to current program settings (use
for
minus). A high setpoint must be within the
Decimal Minimum and Maximum and must not be
less than the Low Se Hysteresis value.
Exit to Main Menu
Next setting
Cv3: "Setpoint Low is . . ."
You:
Enter new value
Enter the new setpoint as a 1 to 4 digit value, the
decimal point will automatically be placed
according to current program settings (use
for
minus). A low setpoint must be within Decimal
Minimum and Maximum and must not be more
than the High Setpoint - Hysteresis value.
Exit to Main Menu
Next setting
Cv3: "Alarm Format is . . . "
You:
Enter new value
0 = non latching
1 = latched
Exit to Main Menu
Next setting