Barnes OGP 2 HP, Руководство по обслуживанию

Страница: 23 / 36

23
Impeller
Assemble spacer sleeve to second stage impeller by applying green loctite to 1” threads on spacer
sleeve and thread onto impeller. Assemble impeller and spacer sleeve assembly onto motor shaft with
machined step fi tting inside I.D. of seal spring by turning clockwise while holding shaft stationary with a
screwdriver.
Tap impeller with a fl at punch and hammer in a clockwise direction while holding the shaft stationary with
a screwdriver. This will snug the impeller on the shaft.
CAUTION: USE CAUTION NOT TO DAMAGE THE THREADS ON THE SHAFT.
51
50
53
52