Barnes OGP 2 HP, Руководство по обслуживанию

Страница: 16 / 36

16
Motor
Remove the four long 1/4” hex head stator bolts and carefully remove the motor stator from the rotor.
A pair of screwdrivers may be helpful in removing the motor stator.
CAUTION: USE CARE NOT TO DAMAGE MOTOR WINDINGS WHEN REMOVING
MOTOR STATOR.
Motor rotor and lower bearing can be removed from the seal plate by using an arbor press and lightly
pressing on the wet end of rotor shaft. Make sure to press straight down on shaft while protecting threads
from damage. Lower pump end bearing should be a tight slip fi t to the seal plate.
31
30
33
32