Barnes 4CDD6, Инструкция по установке и эксплуатации

Страница: 5 / 20

5
IMPORTANT !
1.) DO NOT USE FOR PUMPING FLUIDS WITH A FLASH POINT OF LESS THAN 100°F.
2.) MAKE CERTAIN THAT PUMP AND/OR MOTOR ASSEMBLY AND CONTROLS HAVE THE APPROPRIATE RATINGS FOR THE GIVEN APPLICATION
AREA CLASSIFICATION. (ie DIVISION I, AGENCY LISTING ETC.)
SUCTION/DISCHARGE ...... 4” x 4" NPT Female
LIQUID TEMPERATURE ...... 160°F (71°C) Continuous
SUCT/DISCH CHAMBER ..... Cast Iron ASTM A-48, Class 30
WATER BOX ......................... Cast Iron ASTM A-48, Class 30
DIAPHRAGM BOTTOM ........ Cast Iron ASTM A-48, Class 30
DIAPHRAGM ........................ Natural Ruber
BEARING .............................. Roller
FLAP VALVE ......................... Natural Rubber
PAINT .................................... Air Dry Enamel
OUTPUT STROKES ............. 60 Per Minute (Note: Speed
may be adjusted between
approx. 50 and 65 strokes per
minute.)
TIRES:
4CDD6-2 & 4CDG8-2 ............
4" x 8" Industrial Tires
TRAILER :
4CDD6-1 & 4CDG8-1 .............
High Way w/6" x 15" Wheels, "C"
Rated Tires, Tail Lights, Side
Markers, Safety Chains,
Adjustable Front Stand,
Ring Hitch
4CDD6 ENGINE:
Make/Model ............ Hatz 1B20 w/6:1 Reduction,
Recoil, Diesel
Rating ..................... 4.6HP @ 3600RPM
Tank/Run TIme ....... .79 Gal. US, 3Hr.
4CDG8 ENGINE:
Make/Model ............ Honda GX240 w/6:1 Reduction,
Recoil, Gasoline
Rating ..................... 8HP @ 3600RPM
Tank/Run TIme ....... 1.6 Gal. US, 3.8Hr.
(Trailer Mount 25 Gal. 60 Hrs.)
OPTIONAL EQUIPMENT ...... Electric Start
SECTION: A - PUMP SPECIFICATIONS: Wheel Mounted
inches
(mm)
PUMP SERIES: 4CDD6-2 & 4CDG8-2