Barnes 10CCE, Инструкция по установке и эксплуатации

Страница: 6 / 22

6
DISCHARGE ..................
3” (76mm) x 3” (76mm) NPT ,
Female
LIQUID TEMPERATURE
160°F (71°C) Continuous
INTERMEDIATE .............
Cast Iron ASTM A-48, Class 30
VOLUTE .........................
Cast Iron ASTM A-48, Class 30
BODY .............................
Cast Iron ASTM A-48, Class 30
PEDESTAL .....................
Cast Iron ASTM A-48, Class 30
IMPELLER Design ...........
Semi-Open
Material ........
Cast Iron ASTM A-48, Class 30
Dynamically Balanced, ISO G6.3
SHAFT ............................
Stainless Steel
SQUARE RINGS ............
Buna-N
HARDWARE ..................
300 Series Stainless Steel
PAINT .............................
Air dry enamel
SEAL Design ..........
Mechanical
Lubrication....
Self-Lubrication
Material ........
Rotating Faces - Carbon
Stationary Faces - Ni-Resist
Elastomer - Buna-N
Hardware - 300 series stainless steel
SHAFT SLEEVE ............
Bronze
CHECK VALVE:
Material ........
Valve Flap - Neoprene
Weight - Cast Iron ASTM A-48, Class 30
MOTOR: Design ..........
ODP, NEMA B, three phase,
Torque Curve, C-Face, Footed,
Squirrel Cage Induction
Marine Duty per USCG259 and
AIEEE-45, 50 ˚ C Ambient
Insulation ......
Class B
THREE PHASE ..............
200-240/480 is Tri voltage motor.
OPTIONAL EQUIPMENT:
Seal Material, TEFC motors
SECTION: A - PUMP SPECIFICATIONS: 15CCE
inches
(mm)
ODP MOTOR DESIGN TEFC MOTOR DESIGN
MODEL
NO.
HP VOLTS PH RPM
(NOM)
FULL
LOAD
AMPS
LOCKED
ROTOR
AMPS
WEIGHT
NET LBS
FULL
LOAD
AMPS
LOCKED
ROTOR
AMPS
15CCE 7.5 200-230/460 3 3450 22/11 127/63.5 248 20-19.2/9.6
IMPORTANT!
1.)
DO NOT
USE FOR PUMPING FLUIDS WITH A FLASH POINT OF LESS THAN 100°F.
2.) MAKE CERTAIN THAT PUMP AND/OR MOTOR ASSEMBLY AND CONTROLS HAVE THE APPROPRIATE RATINGS FOR THE GIVEN
APPLICATION AREA CLASSIFICATION (ie DIVISION I, AGENCY LISTING ETC.)