11
EN
The appliance turns on,
but the cycle times are
too long/ no ice is produced
Condenser blocked with dust
Call your agent or qualified technician
Condenser filter is blocked
Clean the condenser filter
Water supply
Check water supply, water pressure, hoses
not blocked, hoses connected properly
Water inlet valve blocked
Clean the water inlet valve
Thermostat (Ice cube) is set
too high (Icecube too big)
Set the thermostat to a lower position
Appliance is located near
a heat source or air flow to
the condenser is being
interrupted
Move the appliance to a more suitable location
Ventilation holes are blocked
Check distance to other objects and keep
ventilation holes clear
Ambient temperature is too
high
Increase ventilation or move appliance to
a cooler position
Ice cube is incomplete
or cloudy
Bad potable water quality
Install a filter system
Spray system is blocked
Clean the sprayhead and the nozzles, make sure
the sediment catcher is cleared
Spray nozzles on the spray
head are misaligned
make sure that the nozzles are assembled in
90 degree to the spray head (not slightly rotated)
The appliance is unusually
loud
Loose nut/ screw
Check and tighten all nuts and screws
The appliance has not been
installed in a level or stable
position
Check installation position and change
if necessary
The appliance is not properly
leveled
Adjust the screw feet to level the appliance
(if applicable)
The appliance is leaking
water
The discharge outlet is
blocked
Clear the discharge outlet
The discharge hose or water
inlet pipe is damaged
Replace the hose
Seal of water inlet pipe is
missing or defect
Replace the seal
