TOTE-ALONG OWNER'S INSTRUCTIONS
16 GALLON - P/N 28191
**Contents: Instructions, warranty card, tow handle, pin for handle, black square cap for handle, 1 grey filler hose, 1 bobber gauge, 2 bayonet hose
adaptors, 2 hose clamps, 1 garden hose cap, 1 gasket for garden hose cap, 2 - 3" caps, 2 straps for caps, and 1 sewer hose.
Step 1
- Take everything out of the box (tank and hardware bag and handle).
Step 2
- Take everything out of the plastic bag.
Step 3
- Attach tow handle (be sure the handle is turned the correct way--with the loop facing out or away from tank, so the handle
will lean against tank when it is attached). Attach square black plastic cap to tow handle.
Step 4
- Put sewer hose onto adaptors and tighten with clamps. (This is the hardest thing hardest part of putting your tank together.)
To make your life easier and less muttering under your breath, take a hair dryer, heat the hose slightly. The hose will expand to make
the connection simpler. You can do it without a hairdryer, but you may break a nail and it takes some time and patience.
Once you
get one adaptor end on, put the two silver hose clamps onto hose and then attach the other adaptor. That way you won't have to
unscrew the hose clamp to insert it around the hose. Now, tighten the hose clamp at the base of the adaptor and hose. (You can use
a coin to tighten, if you don't have a screwdriver handy.)
Step 5
- Attach one end of the rubber strap to 3" cap(s) and attach the other end of rubber strap to tank (one on side at valve and one
on top). Close caps on tank for transporting. When you take the caps off to attach 3" adaptor/sewer hose assembly for emptying,
you will still have your transport caps at hands reach.
Tow handle
with pin
attached.
Attach tow handle
with pin.
Attach black cap.
Completed
sewer hose
assembly
3" cap with
strap attached--
top of tank
3" cap with
strap attached--
side valve
16 Gallon Tote
out of box.
Contents of hardware bag ** and tow handle.
Over please
Tow handle attached
to tank
16 Gallon Assembled
