BARIX AG
| Ringstrasse 15 A | CH-8600 Dübendorf | T + 41 43 43322 11 | www.barix.com
Page 7
/
10
1.
2.
3.
6 Network Settings
In the IP Former Settings page there are parameters used to configure your device with the desired network settings. To set the
network settings:
Wire your IP Former to a network where a DHCP server is available and switch it on, hear the IP announced over the audio
output (SonicIP
® function) and connect to its web browser
Locate the Network Settings in the "Settings" menu
Once settings are configured as desired click on Submit at the bottom of the page, the device will restart and if the IP is
changed you must input the new address in the top bar
7 Update the Firmware of IP Former
It is always good practice to run the latest firmware on the IP Former. Latest Firmwares includes improvements and bug fixes. The
firmware on the IP Former can be updated using the local web interface.
To update the firmware from the web user interface you need first to download the TAR package from the Barix
(Firmware is under Products
→
Decoder
→
IP Former) or simply type: IP Former in the search
bar in the same page. In this page are available only the latest firmware from Barix.
Once the package is downloaded:
