network interface is initialized during bootup, the right LED with show any incoming or
outgoing network traffic. The left LED is showing the current network link state.
Back – RS232
The Instreamer ICE provides an RS-232 serial interface. The RS-232 interface is supplied
via a 9-pin sub D male connector, wired as a
DTE
. The connector's DTE wiring is similar to a
personal computer's serial port, as defined in the following table.
Pin
Direction
Function
1
No connection
2
To Instreamer ICE
RxD Receive Data
3
From Instreamer ICE
TxD Transmit Data
4
No connection
5
From Instreamer ICE
Ground
6
No connection
7
From Instreamer ICE
RTS (Ready To Send)
8
To Instreamer ICE
CTS (Clear To Send)
9
No connection
Note
Important: the baud rate for the RS-232 port is not configurable! This serial RS232 Interface
can be used to insert Metadata to the audio stream. It works with fix serial settings:
115200 baud
8 data bit
1 stop bit
No parity
No flow control
Line-in (RCA/Cinch input)
The Line-In audio input is on the backside of the device. It is stereo interface for analog
cinch cables.
Released: “Date”
Instreamer ICE
User Manual
10
