________________________________________________________________________________________
© Barix AG 5/2018, all rights reserved. All information is subject to change without notice. All mentioned trademarks belong to their
respective owners and are used for reference only. Barix, Instreamer and SonicIP are trademarks of Barix AG, Switzerland, and are
registered in certain countries.
Front view
Rear view
___________________________________________________________________________________________________
A
Reset Button
Press and hold the reset button until LED1
starts blinking (i.e. for approx. 10 seconds).
Release it and the device will be rebooted and
the factory default settings will be restored.
Description
Description
B
EXT. ports
USB 2.0 ports (for future purposes)
C
Status LEDs
LED1 - system status (see "Device" section)
LED2 - app.status (see "Device" section)
Description
Description
E
Line-in
f
RCA inputs for audio sources (white: Left
Line input; red: Right Line input)
Description
F
RS-232 serial (DSUB 9 pin male)
alinterface port with standard D-sub 9-
(For future purposes)
Pin
1 Not connected
2 Receive Data [RxD]
3 Transmit Data [TxD]
4 V+ 5V, 100mA max
5 Ground [GND]
6 Not connected
7 Ready to Send [RTS]
8 Clear to Send [CTS]
9 Not connected
Description
G LAN port
RJ45 connector - 10/100 Ethernet
A
B
C
D
E
F
G
H
D
Headphone out
Standard stereo mini jack (3.5mm)
Description
H Power
Barrel 5.5 x 2.1 mm female connector
5VDC 2A input power (positive polarity)
Description
