BARIX Extreamer P5, Руководство по эксплуатации продукта

Страница: 23 / 26

7.5 Audio & I/O Interfaces
Speaker Interface
Parameter Details
Connector type Weidmuller 2 pin male terminal
Audio output* Speaker output 8 Ohm 5 Watt
* For details see following sections.
Audio Processor (Codec)
VLSI VS1053B Decoding features:
Format Sampling rate / Bit rate & type
PCM 16bit linear 8, 16, 22.05, 24, 32, 44.1, 48 kHz
PCM 8bit logarithmic
(µLaw / aLaw) 8, 16, 22.05, 24, 32, 44.1, 48 kHz
MPEG1 & MPEG2
Layer 3 (MP3) 8 to 48 kHz / 32..320 kbps, constant bitrate (CBR) and
variable bit rate (VBR)
HE-AAC v2, SBR +
PS (AAC+) 8 to 48 kHz / up to 576 kbps, with or without Spectral Band
Replication (SBR), with or without Parametric Stereo (PS)
Ogg Vorbis 48 kHz / 500 kbps
Speaker output and D/A Conversion
Speaker (8 Ohm) output audio path and D/A conversion (Micronas MAS3587F) typical values:
Parameter Value Unit
Full Scale Output Voltage (Peak-to-peak) 8 Ohm load* 18.86
6.67
V
PP
V
RMS
Max output power on 8 Ohm speaker 5.56 W
RMS
Frequency response (-3dB) @ 48 kHz sample rate PCM 20..11'600 Hz
Frequency response with 2 (+0.5dB @ 5 kHz) 20..13'000 Hz
Frequency response with 3 (+1.4dB @ 7 kHz) 20..15'000 Hz
Output signal-to-noise ratio (SNR) -90 dB
Dynamic Range 90 dB
Total Harmonic Distortion (THD @ -3dBFS = 2.8W) 0.665 %
Total Harmonic Distortion (THD @ -0.4dBFS = 5W) 1.96 %
Speaker (16 Ohm) output audio path and D/A conversion (Micronas MAS3587F) typical values:
Parameter Value Unit
Full Scale Output Voltage (Peak-to-peak) 16 Ohm load* 19.53
6.9
V
PP
V
RMS
Max output power on 16 Ohm speaker 3.0 W
RMS
Frequency response (-3dB) @ 48 kHz sample rate PCM 25..20'000 Hz
Output signal-to-noise ratio (SNR) -76.5 dB
Dynamic Range 76.5 dB
Total Harmonic Distortion (THD @ -3dBFS = 1.5W) 0.296 %
Total Harmonic Distortion (THD @ -0.4dBFS = 2.72W) 0.296 %
*Output level software controllable
Built-in Parts
Parameter Value Unit
Green Status LED Current (max.) 6 mA
Red Status LED Current (max.) 7 mA
BARIX AG | 23/26