Instructions
2. Start with the appliance unplugged. Fill the tumbler (9) with water
to the WATER marking and pour into the reservoir (2). Place the brew
basket (6) in position and the coffee filter (5) into the brew basket (6).
Turn the drip-stop switch (7) to the open position.
3.Position the tumbler (9) under the brew spout (3). Connect the
appliance to the power outlet.
4.Press the On/Off button (12) to ON (-) position and press START
button (1).
Note: When the appliance is turn on the LED light will illuminate.
5.When brewing is complete, discard water from the tumbler (9) and
rinse the tumbler (9) thoroughly with clean water.
6.Your Iced Coffee Maker is now ready for use.
1. Start with the appliance unplugged.
2. Fill the tumbler (9) to the WATER marking with clean cold water.
3. Lift the lid (4) of the unit and remove the brew basket (6), exposing the
water reservoir (2).
4. Pour the water into the reservoir (2).
NOTE: Never fill the water reservoir (2) above the MAX fill line.
WARNING
To prevent injury from hot steam or potential damage to the appliance,
do not plug the appliance in until the water is in the reservoir and the
tumbler is put in place under the brew spout.
