barfield DPS1000 Скачать руководство пользователя страница 29

Страница: 29 / 106

56-101-01175 Revision P Page | 16

Container Storage

It is recommended that the factory-shipping container and packing materials be retained
should it become necessary, for any reason, to re-ship the Test Set, such as for the
O.E.M. recertification.

Items not included

1. Ruggedized shipping case, Barfield P/N 194-00073 (refer to drawing in Figure 6).

2. Nav-Aids Pitot Static Adapters

– Contact Barfield with your aircraft requirements.

3. Wi-Fi enabled tablet

– either Android or IOS device.

4. Wi-Fi Application

– available as free download from either Google Play Store or Apple App

Store.

Figure 6

Optional Travel / Shipping Case

(Sized to qualify as a checked bag with most commercial airlines)

2. GROUNDING (EARTHING)

A. The supply must provide connection to a protective ground terminal. The unit must always

be connected to the supply ground.

B. The DPS1000 chassis may be grounded to the aircraft or instrument under test using the

Ground stud located in the upper right corner of the panel depicted as item 5 in Figure 11.

CAUTION:

THE GROUND WIRE USED MUST BE NO GREATER THAN 3 METERS IN

LENGTH AS PER EN61326-1: 2013.

Содержание DPS1000











































































































Результаты поиска

Содержание DPS1000

Отзывы:

Бренды по названию

Популярные бренды

barfield DPS1000, Руководство пользователя

Результаты поиска

Содержание DPS1000

Отзывы:

Бренды по названию

Популярные бренды