Fan speed setting
Press SPEED button to select Low, Medium, High fan speed, LED shows:
Function setting
·
, diagram is as below
:
Press FUNCTION button successively to select one or two functions between Anion and UV
Anion
UV
MAINTENANCE AND CLEANING INSTRUCTION
Maintenance and cleaning instruction
Please remove the plug from the
socket before cleaning and maintain.
·
Do not clean the unit with water.
·
If you are cleaning with scour, please dilute the
scour before use.
·
Do not clean the unit with the solvent listed on the right which may cause distortion
or depigmentation.
·
if clean with chemical solvent,please read its cautions carefully before use.
Cautions for replacement of UV lamp
·
(1) When the UV lamp is light, it reminds you to replace it.
(2) In order to avoid hurting eyes or skin, please power off the unit when you need to replace
filters or UV lamp.
Warning
·
Diagram of disassembly
(1)
(2) Hold the UV lamp and rotate it for 90 clockwise or anticlockwise, then take it out.
.
Take off back cover, take out HEPA, activated carbon and photo catalyst filter.
Take off cover and filters
Install UV lamp
·
Diagram of installation
(1)
Install the UV lamp in same way after connecting it with its heads.
Install filter and cover
Anion
UV
Anion and UV
None
Grasp UV lamp and take it out
Alkalescence
Benzene
Acohol
Scour
Decontamination
power
Low
High
Medium
