(1)
.
Pleas do not mistake it with other machine have different voltage external power supply,
put the plug firmly into the power socket.
CAUTIONS BEFORE USE
The working environment
·
Keep the unit 30cm or more from the wall or funiture.
·
Keep the unit 1 meter or more from the TV or computer.
Installation of the filters
(1)
Take off cover on the back
(2)
Take off the HEPA, activated carbon and photo catalyst filter, tear off plastic bag and install it.
Take off filter cover
Install HEPA, activated
carbon and photo catalyst
Power setting
Be sure to
use ground
socket
Disassembly and installation of the cover
Diagram of disassembly:
Press the place of button on the
filter cover through thumb or first
finger, then open the cover.
Press place of button
Disassembly cover of filter
Close filter cover
Fixing two slots
Diagram of installation:
Please let two fixing points of
filter botton into the fixing slot
of unit, then close the filter cover.
Installation is over when you
hear the clear voice”KA”.
OPERATION INSTRUCTION
Power setting
Press the POWER button, the unit starts to work and LED screen display:
Maual
Anion
Low
Mode and time setting
press the MODE button successively to select MANU/AUTO/1H/2H/4H, LED shows:
Remark:
(1) Manu: The unit needs to turn off manually
(2)AUTO: The unit is set to alternate in 20 minutes on and 40 minutes off cycle.
(3)1H/2/H/4H means the unit will stop working after 1 hour/2 hours /4 hours
Manual
4H
2 H
1 H
Auto
