Barefoot Sound MiniMain12, Руководство пользователя

Страница: 5 / 18

1. Description
The MiniMain12 is a four-way active loudspeaker capable of nearfield, mid-field and far-field operation. The
seven drive units are all housed in sealed enclosures. The DSP controlled four-way power amplifier module can
deliver 1200 Watts continuously. The system accepts either analog or 24 bit/192 kHz digital audio signals.
Cutting edge Speaker Emulation technology enable the MiniMain12 to mimic frequency, phase, and transient
responses, dynamic compression and distortion signature of classic studio monitors.
3
2. Startup
1. Verify that AC Voltage select switch on the rear panel is in the correct position for the AC voltage in your
facility (see warnings on pervious page for details) then pug in grounded mains power cable.
2. Set Input toggle switch to either analog (A) or digital (D) depending on the type of source signal you are
using. For digital signals also set the Channel toggle switch to left (L) or right (R) in accordance with the
speaker position.
3. Ensure that the audio signal is fully attenuated (AES3 signal requires digital attenuation) then plug in the
signal XLR cable to the appropriate input.
4. Power on the speaker with the rocker switch located on the rear panel above the mains connector. The LED
indicator on the front of the speaker will illuminate Red for a couple of seconds then turn Aqua.
5. Turn up the audio signal and enjoy!