Form No.
S3401-812
Supersedes
S3401-510
Page
1 of 8
THE WALL-MOUNT™ ONE TON AIR CONDITIONER
The Bard Wall-Mount One Ton Air Conditioner is a self contained energy
efficient heating and cooling system, which is designed to offer maximum
indoor comfort at a minimal cost without using valuable indoor floor space or
outside ground space. The One Ton is the ideal product for versatile
applications such as: new construction, modular offices, school
modernization, telecommunication structures, portable structures or
correctional facilities. Factory or field installed accessories are available to
meet specific job requirements.
Alarm Relay:
Dry contacts for remote alarm on
high or low pressure lockouts.
Low Ambient Control:
Permits operation down to 0°F
outdoor ambient. Can be factory
or field installed.
Engineered Features
Optional Product Features
Fully Modulating Economizer:
Can be factory or field installed.
Commercial Room Ventilator:
Can be factory or field installed.
Aluminum Finned Copper Coils
Grooved tubing (evaporator coil only)
and enhanced louvered fin for maximum
heat transfer and energy efficiency.
Quiet Twin Blowers:
Designed to accept full ducted system
or for non-ducted free blow installations.
High Efficiency Rotary
Compressor
R-410A Refrigerant:
Designed with R-410A (HFC) non-ozone
depleting refrigerant in compliance with
the Montreal protocol and 2010 EPA
requirements.
Liquid Line Filter Drier:
Standard on all units. Protects system
against moisture.
Galvanized 20 Gauge Zinc Coated
Steel Cabinet:
Cleaned, rinsed, sealed and dried before
the polyurethane primer is applied. The
cabinet is handsomely finished with a
baked on textured enamel, which allows
it to withstand 1000 hours of salt spray
tests per ASTM B117-03.
Electrical Components:
Are easily accessible for routine
inspection and maintenance through a
right side, service panel opening.
One Inch, Disposable Air Filter:
Easily removed for replacement from
the outside. Optional two-inch pleated
filter, factory or field installed.
Top Rain Flashing:
Standard feature on all models.
Slope Top:
Standard feature for water run-off.
Compressor Control Module:
Standard on all units. Built-in off-delay
timer adjustable from 30 seconds to 5-
minutes. 2-minute on-delay if power
interrupt. 120-second bypass for low
pressure control, and both soft and
manual lockouts for high and low
pressure controls. Alarm output for
alarm relay.
High & Low Pressure Switches are
Auto-Reset:
Standard on all units. Built-in lockout
circuit resets from the room
thermostat. Provides commercial
quality protection to the compressor.
Barometric Fresh Air Damper:
Allows up to 100 CFM of fresh air.
Automatic Condensate
Disposal System:
Eliminates the need to provide a
separate condensate drain. The drain
valve closes at temperatures above
40° and opens when the temperature
drops below 40°. Built-in slinger ring
fan blade.
Full Length Mounting Flanges
:
Built into cabinet for improved
appearance and easy installation.
W12A
60Hz
10,800 Btuh
9.00 EER
Right Side Control Panel
•
Complies with efficiency requirements of ANSI/ASHRAE/IESNA 90.1-2010.
•
Certified to ANSI/ARI Standard 390-2003 for SPVU (Single Package Vertical Units).
•
Intertek ETL Listed to Standard for Safety Heating and Cooling Equipment ANSI/UL
1995/CSA 22.2 No. 236-05, Fourth Edition.
•
Commercial Product - Not intended for Residential application.
G
REEN
R
EFRIGERANT
R-410A
