Bard Site-Rite 6, Инструкция по эксплуатации

Страница: 18 / 44

16
Site~Rite* 6 Ultrasound System
3 Site~Rite * 6 Ultrasound System Information
3.1
Front Panel Controls
Freeze Image
(In Time Set mode , this button
sets the internal clock to the
displayed values and returns
the system to
Run mode
.)
Increase Gain
(In Time Set mode ,
this button increases or
toggles the selected fi eld.)
Decrease Gain
(In
Time Set
mode , this button
decreases or toggles
the selected fi eld.)
Depth
(In Freeze mode , if this but-
ton is held for more than 5
seconds, the system enters
the
Time Set mode
. In
Time Set mode , this button
selects the next fi eld.)
Depth Markers
Toggles between depth mark-
ers, gridlines and off. Hold
for more than 5 seconds to
toggle between the low and
high contrast image.
Print
Sends the current image to the
printer if connected. If a USB
storage device is connected to
the system, this button will also
save the current screen image to
the storage device.
2.6
Resetting the Site~Rite * 6 Ultrasound System
Should the scanner display ever appear blank or show an exclamation mark ( ! ), the system may
need to be reset.
To reset the system:
1. Depress and release the power button located on the front of the Site~Rite* 6 Ultrasound
System scanner.
2. Wait approximately 60 seconds for the unit to reset itself.
3. Power the unit back on per instructions in section 2.5.
On/Off/Reset