Barco XDL, Руководство по установке

Страница: 59 / 88

59 R5906150 /05 XDL
1
2
Image 5 – 22
1
2
Image 5 – 23
2. Snap the first loop end of the safety cable into the upper clip on the side of the cable bundle (reference 2,
Image 5 – 22 ). and let the loop end point downwards.
3. Slide the rest of the cable around the lens counterclockwise. Click the cable into every clip it passes in this
loop.
Note: Make sure the cable passes between the lens and the cable bundle.
4. Slide the cable through the loop end at the beginning of the cable.
Image 5 – 24 Example of configuration A
5. Install a U-bolt on the lens holder, with the open ends oriented outwards (reference 3). Make sure that both
a part of the loop end and the outgoing part of the safety cable are placed in the enclosure.
Installation procedures