Barco TF-10, Руководство по установке

Страница: 36 / 62

4. Physical installation
A
A
A
A
B
B
C
D
E
Image 4-5
A
Mounting bolts (stud rot)
B Lifting hooks
C Side carry handles
D Data connections
E Power connections
2. Check if each stud rod of the TF-10 tile contains a hexagon nut (M10) fully turned on the stud rod. If not, provide one.
3. Guide the stud rods of the TF-10 tile through the corresponding holes of the mounting plates attached to the support structure.
Caution: Two persons are required at the front of the LED-display to perform this action. Both hands must be free to insert a
tile in a LED-wall. Therefore the use of a ladder to insert a tile is forbidden. Only a solid scaffold or a Z-lift is allowed.
Tip: You can use the Lifting Hook on the top side to lift the TF-10 tile, using a crane, to the desired height.
Image 4-6
4. Place a prevailing torque type hexagon fl ange nut on each stud rod. Do not fasten yet.
5. Level out the TF-10 tile. Use the nut on the stud rods for depth alignment.
Tip: For maximum adjustment space in horizontal direction place the stud rods of the very fi rst TF-10 tile that is placed on the
support structure in the middle of the corresponding slots.
6. Fasten the TF-10 tile . At least one person at the front keeps the TF-10 tile steady until the tile is completely fasten.
32 R59770682 FIXED TF-10 DISPLAY 23/11/2011