![background image](http://html.mh-extra.com/html/barco/tf-10/tf-10_installation-manual_473812011.webp)
1. Safety
1.4
Proper usage
Proper usage of TF-10 tiles
•
No part of the TF-10 tile can come in contact with any type of abrasive.
•
No part of the TF-10 tile can come in contact with any type of corrosive substance.
•
TF-10 tiles are to be used in environments meeting the operating speci
fi
cations.
•
TF-10 tiles are not to be exposed to extreme localized heat or cold exceeding the temperature speci
fi
cations.
•
TF-10 tiles are not to be exposed to any element or situation that will cause any part of the display to heat beyond what occurs
during normal operation. Such situations include but are not limited to lasers, ultrasonic vibration, or any type of substance that
prevents proper ventilation and heat radiation of the TF-10 tiles.
•
Power connected to the TF-10 tiles must meet the speci
fi
cations outlined in the installation manual.
•
Never place a TF-10 tile upon a surface with the LED’s facing downwards. This to prevent damage to the LED’s and the shaders.
•
No force can be applied to the LED’s. Any LED’s damaged due to mechanical stress are not covered by the warranty.
•
Safety and functional features of the display cannot be defeated.
•
Any failures must be immediately and appropriately dealt with. Failing equipment should not left on a wall.
•
Only Barco cables speci
fi
ed to be used with the TF-10 display are to be used to connect components in an TF-10 wall. Further,
care must be taken to connect signal only according to the installation manual.
•
TF-10 tiles are not to be used in the vicinity of any equipment that is not CE and UL/ETL certi
fi
ed.
•
TF-10 tiles are not to be connected to any non-Barco equipment.
•
TF-10 tiles can be cleaned only in accordance to the procedures de
fi
ned in the installation manual.
•
The TF-10 tile is equipped with two air
fi
lters. These
fi
lters must be replaced on a regular basis, depending on the environment
conditions of the tile. It is recommended to replace the
fi
lters every 6 months.
•
TF-10 can withstand class C3 atmosphere for 10 years.
•
If install in coastal cities, the TF-10 display shall be installed 250 meters away from the shoreline horizontally in dry and cold
climates; 500 meters away from the shoreline in case of high humidity and hot climates. The high humidity and hot climate
mean the climate that the humidity is higher than 80% RH and temperature is higher than 0°C for one third of time every year.
R59770682 FIXED TF-10 DISPLAY 23/11/2011
7
Содержание TF-10
