Barco System manual E1, Инструкция по установке и эксплуатации

Страница: 39 / 124

Windows 2000 BarcoMed Nio software installation
40 System manual E1
Hardware Wizard - Video Controller”. Again, please be
patient as Windows will again scan its library of Plug-and-
Play device drivers to see if it has a driver for your BarcoMed
Nio controller.
The BarcoMed Software Install Wizard will automatically
restart and the BarcoMed Product Installation Wizard’s
welcome screen will again be displayed (figure 17 below).
5. By default all the software on the E1 Software CD will be
selected. For the initial installation we recommend that you
install all of the software. If you do not want to install a
particular BarcoMed Software product at this time, deselect it
by clearing the checkbox next to it. Click
“Install” to
continue or “Cancel” to exit the wizard.
Figure 17
Driver installation
6. Click “Next” on the Display Driver Wizard’s Welcome Screen
to continue or “Cancel” to exit the Display Driver Wizard and
return to the Software Install Wizard.
The Device Selection Screen’s dialog box (figure 18 on
page 41) should show only those devices physically installed
and supported by the BarcoMed display controller driver on