Barco System manual E1, Инструкция по установке и эксплуатации

Страница: 102 / 124

Troubleshooting
System manual E1 103
Pixel Faults
Permanently dark or bright pixels can happen to TFT displays. 10
or less permanently dead pixels do not make out a good case for
exchanging the unit.
Please contact our Customer Service Department if the number of
pixel faults exceeds the above-mentioned figure.
Windows 2000 display resolution
Tip: These instructions apply to both Windows
®
2000 and
Windows
®
XP .
Important: If you are using a color display in conjunction with
your Barco grayscale display(s) you should configure your
desktop before setting the resolution of the your Barco grayscale
display(s).
Configuring the Windows 2000 or Windows XP desktop
Under Windows 2000 or Windows XP the recommended
configuration for best grayscale image quality when using a color
display in conjunction with your high-resolution grayscale
display(s) is to set the
color display
as the primary monitor. Then
set the colors setting on the “Settings” tab of the Windows
Display Control Panel to the highest possible color depth (e.g. 32
bits-per-pixel “true color”) supported by the color display’s
controller.
The colors setting for your high-resolution grayscale displays
should default to 256 colors (8 bits per pixel). You should set the
palette mode for the your high-resolution grayscale displays to
Static Gray palette with NO system colors
. This guarantees that
the all of the 256 gray levels available for GDI graphics will be
present, and also eliminates the danger that colors will change
when focus moves among different applications.
However, if you are using the
Color to Gray Compatibility
palette
mode, the color setting for your high-resolution grayscale
displays should default to True Color (32 bits per pixel). Even