Barco SLite, Руководство по обслуживанию

Страница: 7 / 53

1. Safety
1. SAFETY
1.1 Servicing safety instructions
W
ARNING
:
Servicing must be done by authorized and qualified technical personnel only, which are thor-
oughly familiar with the product and all of the proper safety checks of this product.
Personal Protection
Image 1-1
Warning Image 1-2
Suspended Loads Image 1-3
Hard Hat Image 1-4
Mind Your Fingers
When servicing on site be aware of suspended loads, wear a hard hat to reduce the risk of personal injury. Mind your fingers while
working with heavy loads.
Safety precautions:
• Follow all servicing and safety instructions mentioned in the servicing procedures.
• Unplug the tile AC power cord from the AC power source and wait about 10 minutes before start any servicing to the tile. This
to allow the capacitors to discharge.
• Some boards contains electrostatically sensitive devices (ESD). Take the necessary precautions to prevent the incidence of
component damage caused by static electricity.
• Do not modify and/or replicate any component. BARCO uses specific materials and manufacturing processes in order to
achieve part strength. No other parts then BARCO parts are allowed.
Additional on-site servicing safety precautions:
• Fence off a restricted area of at least 3 meters around the LED-wall using an eye-catching fence and “KEEP OUT” signs. This
to prevent unauthorized persons come near the LED-wall during servicing.
• Inspect the complete LED-wall for security, wear, deformation, corrosion, and any other circumstances that may effect the load
handling capability of the part.
• Check the handles on the back of the tiles for loss of strength due to exposing to environmental conditions. Replace damaged
handles immediately before starting any servicing to the tiles.
• In case of removing a tile out of the LED-wall, ensure the tile is secured with a safety cable to the LED-wall structure.
• In case of replacing a LED assembly of an SLite tile, ensure the LED assembly is secured with a safety cable to the SLite frame.
• Take the necessary precautions to prevent water intrusion inside the tile due to weather conditions.
R5976621 SLITE DISPLAY 02/09/2005 3